English
Russian
French
Spanish
Portuguese
ArabicRequest A Quote
The counterpunch mobile crushing station is a kind of crushing machine which USES the impact energy to break the material.When materials enter the impact zone of the plate hammer,they are broken bythe high speed impactof the plate hammer,and are thrown to the counter device installed above the rotor,which is broken again,and then they are bounced back from the counterfoil to the impact zone of the plate hammer again.This processis repeated until the material is broken down to the required size and discharged from the lower part of the machine.Adjusting the gap between the counterattack frame and the rotor frame can change the material size and shape.The machine adopts the sping safety device after the counter-attaking plate.When the nan-crushing material enters the crushing chamber,the front and back counter-attacking frame retreats and the non-crushing material is discharged from the machine.
Mining
Construction waste disposal
Traffic Engineering
Water conservancy projects
High mobility
High efficiency and energy saving
Flexible configuration
Durable and reliable
| Main Technical Parameters | |||||
| Project | Unit | MG938F1010 | MG938F1210 | MG1142F1214 | MG1142F1315 |
| The transportation length | mm | 10800 | 11900 | 13100 | 13100 |
| Transport width | mm | 2480 | 2550 | 2800 | 2900 |
| Transport height | mm | 3900 | 3900 | 4450 | 4450 |
| The maximum length | mm | 11200 | 12100 | 13300 | 13300 |
| Maximum width | mm | 2900 | 2900 | 2950 | 2950 |
| Maximum height | mm | 4100 | 4100 | 5200 | 5200 |
| Weight | t | 28 | 39 | 44 | 54 |
| Tire configuration | Install the double shafts in parallel | Install the double shafts in parallel | Install the three axes in parallel | Install the three axes in parallel | |
| Model number of crusher | PF-1010 | PF-1210 | PF-1214 | PF-1315 | |
| The largest feed | mm | 300 | 300 | 300 | 350 |
| Processing | t/h | 70-130 | 70-130 | 90-180 | 120-250 |
| Faed type | GZD-850×3000 | GZD-960×3800 | GZD-1100×4200 | GZD-1100×4200 | |
| Main belt type no | B800×8M | B800×8.5M | B1000×9M | B1000×9M | |
| Lateral belt type (optional) | B450×3M | B450×3.2M | B500×3.5M | B500×3.5M | |
| Type of generator set (optional) | kw | 200 | 200 | 250 | 330 |
| Type of iron remover (optional) | RCMD(C)-8 | RCMD(C)-8 | RCMD(C-10 | RCMD(C)-10 | |
Our door is always open
We thrive on building collaborative partnerships with quality mining machinery sales and construction machinery sellers.
If that sounds like you, we’d love to talk.
